Maguire Weigh Scale Blender Controller Video Index:

     

Time
Description
1:40     Controller Overview
7:40     Checkout procedure
10:35     Setting the model #
12:40     Confirm load cells work
16:45     Controller Description
17:40
Setting thumbwheel switches
20:17
Keypad description
25:00
EXIT key
25:25
VIEW running totals of all components blended
28:50
RECIPE storage and retrieval
31:30
Locking out LED's
32:40
Set BATCH weight to fill barrel, box, etc.
35:50
Set FAST mode to increase blender throughput
41:48
TAG reports with work order#, operator#, recipe#, etc.
45:25
Verify or lockout thumbwheel switches
49:35
OPERATE valve, alarm, mixer, etc
50:13
Test repeatability of valve with TIME key
50:13
Determine lag time with TIME key
54:00
Run CALIBRATION test
55:30
Set ZERO and FULL weight
59:50
PARAMETERS
1:00:00
FLG: turn on RECIPE, BATCH, FAST, and TAG keys
1:01:20
RAL, NAL, CAL, AAL: set alarm functions
1:03:58
MIX: set mix time, set jog time
1:05:45
FCV: set flow control valve delay time
1:07:54
DTI: set weigh bin dump time
1:08:15
KDF: set sensitivity of weight readings during calibration of load cells
1:09:02
WDF: set sensitivity of weight readings during normal operation
1:11:45
BER: set emergency bailout to avoid weigh bin overfill
1:13:15
CXT, AXT: shift decimal point on thumbwheel
1:14:30
ROC: add color or additive to regrind
1:15:57
ROV: increase regrind usage when excess regrind is available
1:17:35
RHL: set high/low level sensor in hopper
1:18:20
FUL: set full weight of bin
1:18:30
MAX: set maximum permissible weight in weigh bin
1:18:47
TH/TL: set low and high tare weights
1:21:25
RSE, NSE, CSE, ASK: set maximum limit for thumbwheel setting
1:22:48
RLO: set low limit to regrind setting
1:23:00
DLY: set time mix chamber sensor must be uncovered to start next cycle
1:28:00
RLA, NLA, CLA, ALA: set lag time
1:28:33
PRC: set max percent rate change forced by error correction routine
1:27:05
STL: set settle time
1:30:00
STAR FUNCTIONS
1:30:55
*12: copy parameter table from ROM to RAM
1:31:45
*23: copy parameter table from RAM to EEPROM
1:32:10
*32: copy parameter table from EEPROM to RAM
1:33:10
*66: enter weigh scale blender identification number
1:33:45
*11: set USA/Europe date format
1:34:28
*89: set units - grams, kilograms, ounces, pounds
1:35:00
*77: print all internal parameters
1:35:12
*45: change password for manual mode
1:35:20
*78: change password for program mode
1:36:00
*25: reset ROM OK flag
1:36:24
*88: print copy of display to document weight readout
1:37:08
*98: set flag for continuous load cell raw signal readout
1:37:42
*87: set flag for volumetric operation
1:39:04
*54: set flag to print each cycle information
1:40:03
*69: set flag to treat regrind as a second natural
1:41:47
ALARM FUNCTIONS
1:42:46
PRINTER FUNCTIONS
1:43:08
   - print out every cycle (*54)
1:45:00
   - print out totals (grand total, interim total)
1:46:53
   - print out internal parameters (*77)
1:47:35
12 software
Maguire Products, Inc. HQ, 11 Crozerville Rd, Aston, PA 19014, USA
Phone: 610-459-4300; Phone 2: 888-459-2412 (North America); Fax: 610-459-2700