Introducing: MicroPlus™ Weigh Scale Blender with pneumatic lift
Standard Features
EasyFlow corner valve standard on the Natural and Regrind bins
Pneumatic vertical pivot valve standard on Color and Additive bins
Ideal for small processing machines
Reduced weight and footprint
Overall precision of ±0.1% of specified blend
Compressed air gun for cleanout included
Easy access to all material contact surfaces of the machine including hopper, feeder(s), weigh bin, and mixing chamber permits rapid color change without the use of tools
Proprietary 12-12 microprocessor-control technology monitors and confirms the weight of each ingredient (touch-screen optional)
Compensation is made when a variation in dispense weight is detected
Additional standby bins are available which can be preloaded so color change time can be reduced to the few seconds it takes to swap bins
Vibration management
Improved documentation capabilities
Bin lids and loaders can be easily elevated to allow fast cleaning or bin change.
All components are blended by weight based on the setting shown on the master controller. Each component is dispensed separately into a single weighing chamber, and then all components are dropped into a continuous mixing chamber which delivers a homogenous blend.
The entire unit is designed to mount over the feed throat of the process machine or on a floor stand. This unique weighing method allows blenders to operate correctly in spite of vibration or shaking caused by the molding machine or extruder.
All Materials Metered By Weight
Accuracy is constantly monitored.
Automatic compensation for material variations.
Extreme Accuracy
In actual operation, color and additive is held to within 1/10 of 1% of requested ratio.
Automatic Recalibration
Every batch is followed by an error correction routine that continuously hunts toward perfect dispense weights.
Direct Setting of Percentages; No Calculations
Enter settings for percentage of color, additive, and regrind on the thumbwheel switches and the system does the rest.
Very Simple Operation
Load hoppers with material; REGRIND, NATURAL, COLOR, ADDITIVE.
Set thumbwheel switches for percentage desired.
Turn controller on.
The unit now operates automatically, adding components in the proper percentages. If material runs out an alarm will sound.